| PART |
Description |
Maker |
| AWT6130 |
The AWT6130 provides the additional output power margin RF designers need to overcome additional post-PA insertion loss in tri-mode ...
Cellular Dual Mode AMPS/CDMA 3.5V 29dBm Power Amplifier Module
|
Anadigics Inc
ANADIGICS, Inc
|
| UC017 |
Additional Features of the ADuC83x Family
|
Analog Devices
|
| CF-1000-10 |
Quick change of cross section without the need for additional adjustments
|
PHOENIX CONTACT
|
| 95622-4882 SD-95622-005 0956224882 |
Modular Jack, Right Angle, Fully Shielded, SMT, 8/8, Additional Panel Grounding
|
Molex Electronics Ltd.
http://
|
| 2706030 |
Lower part of housing, fully assembled, with additional serial contact, open, no. of positions 10 2
|
PHOENIX CONTACT
|
| SD-112038-5003 TCDDN-8B4P-KKU TCDDN-8B4P-KKU-T 112 |
BradControl Class 60mm 8 Port IO module, 12 Inputs/4 Outputs, M23 with the additional terminal block
|
Molex Electronics Ltd.
|
| REL-IR-4L-120AC |
Plug-in industrial relay with power contacts and additional hard gold plating, 4 PDTs, test button, status LED, mechanical switch setting display, coil voltage: 120 V AC
|
PHOENIX CONTACT
|
| EFM32G290F32-BGA112 EFM32G890F32-BGA112 EFM32G840F |
Updated specifications based on the results of additional silicon characterization
|
Silicon Laboratories
|
| 0603YC102K4Z4A 0603YC102M4Z4A 0603YC102J4Z4A 0603Y |
CAPACITOR, CERAMIC, MULTILAYER, 16 V, X7R, 0.001 uF, SURFACE MOUNT, 0603 CHIP, ROHS COMPLIANT
CAPACITOR, CERAMIC, MULTILAYER, 16 V, X7R, 0.01 uF, SURFACE MOUNT, 0603 CHIP, ROHS COMPLIANT
MLCC with FLEXITERM?
With increased requirements from the automotive industry for additional component robustness, AVX recognized the need to produce a MLCC with enhanced mechanical strength.
MLCC with FLEXITERM General Specifications
With increased requirements from the automotive industry for additional component robustness, AVX recognized the need to produce a MLCC with enhanced mechanical strength.
MLCC with FLEXITERM
MLCC with FLEXITERM General Specifications
With increased requirements from the automotive industry for additional component robustness, AVX recognized the need to produce a MLCC with enhanced mechanical strength.
|
AVX, Corp.
AVX Corporation
|
| SK210 |
Additional testing can be offered upon request
|
Sangdest Microelectroni...
|
| SD88205 |
Additional testing can be offered upon request
|
Sangdest Microelectroni...
|
| 4754.3000 4754.5200 4754.8200 4754.7400 |
Power Distribution Unit; Module of 4 outlets; additional carrier frame for accessory modules; 4 IEC Outlets; Voltage Rating: 250 VAC; Current Rating: 10A; 10/15A, 250VAC, FEMALE, MAINS POWER CONNECTOR, SOLDER
|
SCHURTER AG
SCHURTER INC
|
